- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
Construction method of water-based wood paint
The construction surface must be firm, clean and dry, and remove grease and impurities.
Release time:
2024-08-23 10:36
Source:
Construction method of water-based wood paint
Wooden surface:
1. The construction surface must be firm, clean and dry, and the grease and impurities must be removed.
2. Dry grind the surface to smooth with #320 sandpaper.
3. The rough wood surface can be filled with water-based wood transparent putty.
4. Coat the matching primer
Note:
1. Before use, dilute with clean water, stir evenly, filter with 200 mesh filter cloth, let stand for 3-5 minutes, and then construct after the bubbles disappear completely.
2, wood moisture content should be less than 15%.
3. It is not recommended to apply water-based wood paint on NC and PU wood primer to avoid adhesion problems between paint layers.
4. For the renovation of paint film of NC, PU and other oily topcoats, it is suggested that water-based wood topcoat can be painted after full polishing, but whether a good construction effect can be obtained depends on the actual construction situation.
5. NC, PU and other oily paints cannot be painted on the water-based wood topcoat to avoid the phenomenon of paint film being dissolved.
6, recommend the use of water-based wood paint professional fiber brush brush construction.
7. Construction at 8-35°C and relative humidity below 80%.
8, brushing to be uniform, should be along the wood grain thin brush, light brush; Follow the principle of thin coating many times, one-time dry film thickness is not more than 30 microns, the total thickness should not exceed 100 microns.
9. Avoid water before the paint film is dry. In order to maintain the better effect of the paint film, water grinding is not possible. If the recoating time is too long and the paint film is dry, it must be polished before brushing.
10. Do not wax, press or rub during curing. Under normal circumstances, the curing period of the paint film is 7 days, but when the paint film is thicker or the temperature is lower or the humidity is higher, the curing period should be extended accordingly.
11. After the construction is completed, clean all kinds of utensils with clean water in time.
12. After use, the lid must be sealed and stored in a cool (4-35°C), dry place.
Related News
Paint and Color Trends Report 2024
With the arrival of 2024, new paint and color trends bring a new perspective to home design, emphasizing the creation of spaces that are both comfortable and close to nature.
The market size of China's UV coating industry is close to 7.7 billion yuan
It is reported that the progress of UV coatings is closely related to the development of its downstream applications.
Sales of thermosetting powder coatings in China reached 2.484 million tons!
Recently, the preliminary report of the statistical results of the powder coating industry in 2023 was released.
Asian Paint Leader's Annual Revenue Exceeds 30 billion yuan, Net Profit Increases 33%!
Recently, Asia Coatings, India's largest paint manufacturer, announced its fourth quarter and full year results for the 2024 fiscal year
Many provinces focus on the development of high-end coatings and other high-end specialty chemicals!
High-performance coatings refer to coating products with excellent performance, including weather resistance, corrosion resistance, decoration, etc.
Technical standard for application of building thermal insulation coatings
Recently, the Shanghai Municipal Housing and Urban-Rural Construction Management Committee
Guangdong Tianzhi Chuang Intelligent Technology Co., Ltd.
Focus on us